Hôtels partenaires
NH Torino Centro
L'hôtel NH Torino Centro, précédemment connu sous le nom de NH Torino Ambasciatori, est situé près des deux principales gares de la ville, à seulement un kilomètre du centre de Turin.
Prix / Convention
169,00 € (TVA incluse) + taxe de séjour 3,70 € – tarif comprenant le petit-déjeuner buffet, le service et la TVA à 10%
Convention valable jusqu’au 15/07/2025
Procédure de réservation
Annulation
En cas d’annulation avant le 06/10/2025 à 16h00 (7 jours avant l’enregistrement), la chambre sera 100 % non pénalisée.
Note
Une carte de crédit est demandée en garantie, avec autorisation de débit en cas de non-paiement ou de paiement partiel, annulations excédant la limite autorisée, extras non réglés, départ tardif, arrivée tardive, départ anticipé et no-show.
Corso Vittorio Emanuele II, 104 – Torino
via Borgo Dora 3/A – Torino
Albergo Ristorante San Giors
Un hôtel d'art, situé en plein cœur du centre historique de Turin, à quelques pas du marché traditionnel de Porta Palazzo, alliant caractéristiques anciennes et modernes. Les chambres, toutes différentes les unes des autres, accueillent des œuvres d'artistes locaux et internationaux.
Prix / Convention
10 % de réduction
Réservation possible jusqu’au 30/09/2025
Procédure de réservation
https://bit.ly/MT102025
En utilisant le code : MT1025
Annulation
Gratuit jusqu’à 48 heures avant l’enregistrement.
Notes
Carte de crédit demandée en garantie, mais aucun paiement ne sera effectué et le solde pourra être réglé par un autre moyen (carte, carte bancaire, Satispay, PayPal, virement instantané) à l’arrivée à l’hôtel.
Strada del Fortino, 36 – Torino
Pacific Hotel il Fortino
Un hôtel quatre étoiles à quelques minutes du centre historique, proche des principales gares et du terminal qui relie la ville à l'aéroport, dans un quartier calme.
Prix / Convention
5 % de réduction
Procédure de réservation
- Cliquez sur « réserver maintenant »
- Entrez le code TU34YE dans la section « insérer un code »
- Procédez à la recherche de la chambre et à la réservation.
Notes
Pour toute assistance, contactez la réception au 011 521 7757 ou envoyez un e-mail à hotelfortino@pacifichotels.it.
Via Corte d’Appello, 4 – Torino
Hotel Antica Dogana
L'Hotel Antica Dogana est situé dans le centre historique de Turin, dans le quartier du Quadrilatero Romano, à quelques pas de l'Hôtel de Ville, de la Cathédrale, du Palais Royal et à proximité des principales attractions touristiques et muséales de la capitale du Piémont.
Prix / Convention
10 % de réduction
Taxe de séjour : 2,80 €/nuit/personne
Procédure de réservation
Envoyer une demande à info@hotelanticadogana.it en indiquant le code de réduction : SEAMARCONI25
Piazza Massaua, 21 – Torino
Holiday Inn Turin – Corso Francia
Holiday Inn Turin Corso Francia est un hôtel 4 étoiles de haute qualité où l'hospitalité est un véritable art. Situé sur la Piazza Massaua (coin Corso Francia) en face de la station de métro, il est à quelques minutes des gares de Porta Susa et Porta Nuova, du centre-ville, avec ses bâtiments historiques, des rues commerçantes et du Centre des Congrès "Lingotto".
Tarifs / Accord spécial
- Chambre double à usage individuel : 140,00 €
Chambre double : 160,00 €
Procédure de réservation
Remplissez le formulaire ci-dessous et envoyez-le avant le 29/09
Politique d’annulation
Annulation sans frais jusqu’à 3 jours avant l’arrivée, ensuite une pénalité de 1 nuit sera appliquée.
À partir du jour précédant l’arrivée, 100% de pénalité.
En cas de non-présentation, 100% de pénalité.
La pénalité sera débitée sur la carte de crédit mentionnée ci-dessus.
James Reid holds a MSc Reliability Engineering & Safety Management from Heriot Watt University and a BEng Chemical Engineering from University of Edinburgh. He has been a chartered Chemical Engineer with the IChemE since 2002 and is also a member of ASTM. Based in the UK, James leads the technical applications team providing global support for all the ester-based products manufactured by global specialty materials company M&I Materials, including the MIDEL range of dielectric liquids. Prior to joining the technical team at M&I Materials in 2019, James has over two decades experience in technical and operational management roles with major UK utility, leading international chemical, and specialist oil companies.
Jean SANCHEZ is senior transformer engineer at EDF, French main generation utility, mostly on investigations, tests and its associated diagnosis, Factory Acceptance Tests, HV bushings, fleet assessments. He’s involved in IEC and CIGRE working groups. He completed a PhD degree on power transformers fault diagnosis in 2011 with a French power transformer reparation factory, TSV.
Ufuk Kivrak has BS and MS degrees in mechanical engineering. He has more than 25 years of industrial experience in transformers and power grid industries. He has worked for ABB in several management positions in Turkey, Thailand and Switzerland. He has led Supply Chain Management organization of ABB Transformer business globally from 2003 to 2015, which included explosive growth of transformer market from 2003 to 2008, which was followed by a market collapse in 2009 and onwards. In 2015, he has joined Alstom Grid as VP-Strategic Sourcing and continued as Head of Strategic Sourcing in GE Grid Solutions after Alstom was acquired by GE. Currently he is Managing Director of SCM Consulting GmbH.
Armando Pastore received his mechanical engineering master’s degree from University of Naples Federico II. After the graduation he had different experiences in automotive and railway sectors. He joined the power grid business sector in 2012 working as R&D mechanical engineer and product industrialization with special focus on transformer and wall bushings for HVDC application. Since 2015 he has been working at GE Grid Solution covering different roles as engineering manufacturing, production, technical and product manager. In 2022 he has been appointed chair for Italy SC 36A – Insulated bushings.
Riccardo Actis was born in 1969 He holds a degree in mechanical engineering, obtained from Polytechnic University of Turin in 1995. Today he is the Global Operation Manager of the On-Site Service Department at Sea Marconi, with more than 25 years of experience in organization and follow-up of on-site work activities, in Italy, France, Spain, and other countries (KSA, Argentina, Uruguay, Japan). Riccardo has a deep knowledge of condition-based maintenance, as well as treatment and decontamination techniques of insulating liquids.
Vojko Mrdic has been working as applications engineer in transformer testing group at DV Power, a well-known manufacturer of test and measurement equipment for electric power industry. His responsibilities include development of new methods for transformer testing, providing technical support to DV Power customers, as well as performing on-site field testing. Before joining DV Power 13 years ago, he had been working at the large apparatus manufacturer Energoinvest RAOP for 1 year as a junior engineer in circuit breakers and instrument transformers development department. Vojko has a BSc diploma degree in electrical engineering from the University of East Sarajevo.
Roberto Fernández is an experienced Electrical Engineer who has spent most of his career on the transformer design field and R&D activities focused on the magneto-electric and thermal design for a wide range of transformer applications. He is member of the IEC, CIGRE and several national and international working groups. He is currently the Application Technical Leader at Cargill Bioindustrial.
Field Service engineer since 1976 working for Merlin-Gerin on GIS Switchgear, Schneider Electric Equipment, JST Tranformateurs , following in SIEMENS as African Aera sales Manager and JST Maintenance as business development
Dr. Sameera completed his Bachelor of Science in Engineering (Honors) and Master of Science in Electrical and Electronic Engineering at the University of Peradeniya, Sri Lanka. After graduating, he worked as a High Voltage Laboratory Instructor at the University of Peradeniya and as a Research Assistant in the Condition Monitoring Team at the Engineering Design Centre. He then pursued his PhD at the University of Queensland, Australia. Following that, he joined the same university as a postdoctoral research fellow, where he investigated the use of drone footage and Machine Learning technologies for detecting overhead conductor defects. After completing his fellowship, he became a consultant at EA Technology, one of the world’s leading asset management consultancy service providers. Currently, he works as an asset strategy engineer at Energy Queensland, the largest distribution network service provider in Australia.
Vander Tumiatti is the founder and owner of SEA MARCONI GROUP (since 1968 – www.seamarconi.com), Torino, Italy, an international company that is involved in research, technologies, products, and services for energy and environment. He has developed BAT and BEP Sustainable Solutions for Life Cycle Management (LCM) of insulating liquids and transformers focalized on inventory, control, diagnosis, decontamination, depolarization (DBDS, TCS, and polar compounds) and dehalogenation / detoxification (PCBs/POPs). He holds more than 40 international patents and is the author of many international technical and scientific publications. He has been the Assistant Secretary of IEC TC10 from 2000 to 2024. He is also a member of several international groups, with major participation in technical normative activities (CEN, IEC, CIGRE, IEEE). In 2009 June, he received – « 1906 Award », the IEC’s award for “the precious contribution to the understanding of the potentially corrosive behaviour of mineral insulating oil used in power transformers and for his discoveries, recognized worldwide, in the development of diagnostic chemical analyses”. He also received the « Alessandro Volta » award as expert since 1978 in the standardization activities. He was the coordinator of European and national research projects in the field of circular and granular bioeconomy (BIOENPRO®). He also inventor of My Transfo Meeting since 2002 (www.mytransfo.com)