Now on Sale!
The digital pack includes conference proceedings and all presentations shown at the conference.
- pdf files pack
- 21 technical and scientific articles (202 pp.) + 28 ppt presentations
- English language
- Riccardo Actis
Mineral oil to natural ester a validated practice for transformer retrofilling – p. 1 - Omar Ali Al-Ghamdi
Case history of an asset and risk management and maintenance strategy of oil-filled power transformers with corrosive sulfur in the Middle East area On-load integrated treatment of giant power transformers in a severe scenario – p. 9 - Michel Donnadieu Bellon
100 MVA transformer upgrading for noise reduction and better performance – p. 19 - Fabrizio Ferrari
Photovoltaic plants, the role of transformers and related design key points in Renewable Energy – p. 37 - Veronika Haramija
DGA, the ultimate tool for detecting anomalies in electrical equipment with insulating fluids – from basic concepts to real case studies – p. 45 - Ufuk Kivrak
Is There a Green Future for the Transformer Industry? – p. 55 - Riccardo Maina
Additives in natural esters what, when, how, and why – p. 69 - Riccardo Maina
The involvement of reactive and insulat-ing materials in predictive diagnostics for transformers – p. 77 - Tony McGrail
Condition Monitoring in the Renewables: Special Considerations – p. 83 - Vojko Mrdic
Using DVtest (DRM) method to detect bad contacts inside on-load tap changers – p. 91 - Alfredo Ortiz Fernández
The effect of temperature in the designs of power transformers that use biode-gradable esters as coolant (BIOTRAFO) – p. 97 - Bruce Pahlavanpour
Revised IEC Standard for Maintenance of In-Service Insulating Liquid – p. 105 - Armando Pastore
Challenging Aspects in Technologies and Design of High Voltage Transformer Bushings – p. 109 - Diego Pattaro
LFH (Low Frequency Heating) application case studies, performance, and benefits of this technique for on-site dehumidification of electrical transformers – p. 121 - Christian Pössniker
Is bubble formation a limiting factor for transformer short-time emergency overloading? – p. 135 - Diego M. Robalino
A compendium of transformer testing best practices and novel methodologies for field condition assessment – p. 153 - Oleg Roizman
Online Continuous Measurement and Interpretation of Moisture in Transformers – p. 161 - Sameera Samarasinghe
Formation, Pre-Detection, and Mitiga-tion of Silver Sulfide Corrosion on On-Load Tap Changers (OLTCs) 171 - Jean Sanchez
Oil Analysis on High Voltage Bushings: Use of Fleet Statistics – p. 177 - Fabio Scatiggio
New insulation systems for high thermal performances and greener transformers – p. 183 - Rafał Zaleski
Importance of Correct Procurement Process of Power Transformers – p. 189
-
Price:
€ 150(VAT included)
Instructions:
- Click on the “Buy Now” button above.
- Pay with your credit card.
- After payment you will see a page with the link to download the files (and related password).
- We will ask you by e-mail for the details to issue a regular invoice.
If you encounter any issues, feel free to contact us at info@mytransfo.com
LinkedIn
WhatsApp
Email
Diego Pattaro holds a Bachelor and a Master Degree in Aerospace Engineering from the University of Padova. After experiences in the field of mechanical design, he embarked in his journey into the electrical world with DASOTEC Company. At DASOTEC, he has been active in various roles, ranging from promotion, sales and assistance of monitoring systems and electrical test equipment, primarily for power transformers, to performing on-site installations and commissioning of monitoring devices, organization of testing and maintenance tasks, and hands-on work with maintenance activities and transformer oil treatment, combining both the intellectual activity with practical application. Currently he serves as the Chief Executive Officer (CEO) of DASOTEC, where he continues to sharpen his expertise and knowledge within the world of electromechanics.
James Reid holds a MSc Reliability Engineering & Safety Management from Heriot Watt University and a BEng Chemical Engineering from University of Edinburgh. He has been a chartered Chemical Engineer with the IChemE since 2002 and is also a member of ASTM. Based in the UK, James leads the technical applications team providing global support for all the ester-based products manufactured by global specialty materials company M&I Materials, including the MIDEL range of dielectric liquids. Prior to joining the technical team at M&I Materials in 2019, James has over two decades experience in technical and operational management roles with major UK utility, leading international chemical, and specialist oil companies.
Jean SANCHEZ is senior transformer engineer at EDF, French main generation utility, mostly on investigations, tests and its associated diagnosis, Factory Acceptance Tests, HV bushings, fleet assessments. He’s involved in IEC and CIGRE working groups. He completed a PhD degree on power transformers fault diagnosis in 2011 with a French power transformer reparation factory, TSV.
Ufuk Kivrak has BS and MS degrees in mechanical engineering. He has more than 25 years of industrial experience in transformers and power grid industries. He has worked for ABB in several management positions in Turkey, Thailand and Switzerland. He has led Supply Chain Management organization of ABB Transformer business globally from 2003 to 2015, which included explosive growth of transformer market from 2003 to 2008, which was followed by a market collapse in 2009 and onwards. In 2015, he has joined Alstom Grid as VP-Strategic Sourcing and continued as Head of Strategic Sourcing in GE Grid Solutions after Alstom was acquired by GE. Currently he is Managing Director of SCM Consulting GmbH.
Armando Pastore received his mechanical engineering master’s degree from University of Naples Federico II. After the graduation he had different experiences in automotive and railway sectors. He joined the power grid business sector in 2012 working as R&D mechanical engineer and product industrialization with special focus on transformer and wall bushings for HVDC application. Since 2015 he has been working at GE Grid Solution covering different roles as engineering manufacturing, production, technical and product manager. In 2022 he has been appointed chair for Italy SC 36A – Insulated bushings.
Riccardo Actis was born in 1969 He holds a degree in mechanical engineering, obtained from Polytechnic University of Turin in 1995. Today he is the Global Operation Manager of the On-Site Service Department at Sea Marconi, with more than 25 years of experience in organization and follow-up of on-site work activities, in Italy, France, Spain, and other countries (KSA, Argentina, Uruguay, Japan). Riccardo has a deep knowledge of condition-based maintenance, as well as treatment and decontamination techniques of insulating liquids.
Dr. Diego Robalino is the Global Industry Director – Utilities Transformers at Megger. He specializes in the diagnosis of complex electrical testing procedures and the strategic development of state-of-the-art transformer testing technology. He has over 25 years of involvement in the electrical engineering profession with management responsibilities in the power systems, oil and gas, and research arenas.
Vojko Mrdic has been working as applications engineer in transformer testing group at DV Power, a well-known manufacturer of test and measurement equipment for electric power industry. His responsibilities include development of new methods for transformer testing, providing technical support to DV Power customers, as well as performing on-site field testing. Before joining DV Power 13 years ago, he had been working at the large apparatus manufacturer Energoinvest RAOP for 1 year as a junior engineer in circuit breakers and instrument transformers development department. Vojko has a BSc diploma degree in electrical engineering from the University of East Sarajevo.
Roberto Fernández is an experienced Electrical Engineer who has spent most of his career on the transformer design field and R&D activities focused on the magneto-electric and thermal design for a wide range of transformer applications. He is member of the IEC, CIGRE and several national and international working groups. He is currently the Application Technical Leader at Cargill Bioindustrial.
Alfredo Ortiz Fernández is Professor in the area of Electrical and Energy Engineering at the University of Cantabria.
Field Service engineer since 1976 working for Merlin-Gerin on GIS Switchgear, Schneider Electric Equipment, JST Tranformateurs , following in SIEMENS as African Aera sales Manager and JST Maintenance as business development
Dr. Sameera completed his Bachelor of Science in Engineering (Honors) and Master of Science in Electrical and Electronic Engineering at the University of Peradeniya, Sri Lanka. After graduating, he worked as a High Voltage Laboratory Instructor at the University of Peradeniya and as a Research Assistant in the Condition Monitoring Team at the Engineering Design Centre. He then pursued his PhD at the University of Queensland, Australia. Following that, he joined the same university as a postdoctoral research fellow, where he investigated the use of drone footage and Machine Learning technologies for detecting overhead conductor defects. After completing his fellowship, he became a consultant at EA Technology, one of the world’s leading asset management consultancy service providers. Currently, he works as an asset strategy engineer at Energy Queensland, the largest distribution network service provider in Australia.
Fabrizio Ferrari was born in Pavia (Italy) in 1968. He is a Senior Consultant for CESI, for some major Utilities (e.g. EGP, A2A) and for transformer manufacturers. He has experience in small, medium and large power transformers and the main HV, MV and LV components. Previous experience as Quality and Environmental Management Systems Responsible in Italian leader transformer manufacturer Groups. Member of IEC/CEI TC 10, TC 14, TC 36 and TC 68, member of CENELEC TC 14, member of CIGRE A.2 and T&D Europe. Chairman of “Transformers Group” in ANIE Energia (Federation associated to Confindustria).
Christian Pößniker received the B.Sc. and M.Sc. degrees in electrical and computer engineering from the Technical University of Munich, Germany, in 2015 and 2019, respectively and the B.Eng. (Hons) and M.Eng. degrees in electrical engineering from the University of Queensland, Australia, in 2017. He is currently pursuing a Ph.D. degree within the Centre for Smart Grid, Department of Engineering, at the University of Exeter, United Kingdom. He has previously worked as a certified electronics technician after receiving a craftsman apprenticeship in Germany in 2010. His research interests include ageing transformer insulation systems and overloading constraints.
Founder of Sea Marconi in 1968, is the inventor of more than 40 international patents for processes and technologies in the field of decontamination, detoxification, dehalogenation of Persistant Organic Pollutants.
Dr Bruce Pahlavanpour BSC, DIC, PHD from Imperial College, London. Recently he joined Ergon International as consultant. Dr Pahlavanpour was Chief Specialist for the Electrical industry application group within Nynas TDMS.
Fabio Scatiggio was born in Venezia, Italy, in 1957.